%% 11/23/2015
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% AGUJournalTemplate.tex: this template file is for articles formatted with LaTeX
%
% This file includes commands and instructions
% given in the order necessary to produce a final output that will
% satisfy AGU requirements. 
%
% You may copy this file and give it your
% article name, and enter your text.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% PLEASE DO NOT USE YOUR OWN MACROS
% DO NOT USE \newcommand, \renewcommand, or \def, etc.
%
% FOR FIGURES, DO NOT USE \psfrag or \subfigure.
% DO NOT USE \psfrag or \subfigure commands.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Step 1: Set the \documentclass
%
% There are two options for article format:
%
% 1) PLEASE USE THE DRAFT OPTION TO SUBMIT YOUR PAPERS.
% The draft option produces double spaced output.
% 
% 2) numberline will give you line numbers.

%% To submit your paper:
\documentclass[draft,linenumbers]{agujournal}
%\draftfalse

%% For final version.
% \documentclass{agujournal}

% Now, type in the journal name: \journalname{<Journal Name>}

% ie, \journalname{Journal of Geophysical Research}
%% Choose from this list of Journals:
%
% JGR-Atmospheres
% JGR-Biogeosciences
% JGR-Earth Surface
% JGR-Oceans
% JGR-Planets
% JGR-Solid Earth
% JGR-Space Physics
% Global Biochemical Cycles
% Geophysical Research Letters
% Paleoceanography
% Radio Science
% Reviews of Geophysics
% Tectonics
% Space Weather
% Water Resource Research
% Geochemistry, Geophysics, Geosystems
% Journal of Advances in Modeling Earth Systems (JAMES)
% Earth's Future
% Earth and Space Science
%
%


\usepackage{latexsym}
\usepackage{textcomp}
\usepackage{longtable}
\usepackage{multirow,booktabs}
\usepackage{amsfonts,amsmath,amssymb}
\usepackage{xcolor}
\usepackage[colorlinks = true,
            linkcolor = blue,
            urlcolor  = blue,
            citecolor = blue,
            anchorcolor = blue]{hyperref}

\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\usepackage{graphicx}

\DeclareGraphicsExtensions{.pdf,.PDF,.png,.PNG,.jpg,.JPG,.jpeg,.JPEG}


\journalname{AGU Journal}



\begin{document}

%% ------------------------------------------------------------------------ %%
%  Title
% 
% (A title should be specific, informative, and brief. Use
% abbreviations only if they are defined in the abstract. Titles that
% start with general keywords then specific terms are optimized in
% searches)
%
%% ------------------------------------------------------------------------ %%

% Example: \title{This is a test title}

\title{\textbf{Enter your title here (}AGU Word Manuscript Template)}

%% ------------------------------------------------------------------------ %%
%
%  AUTHORS AND AFFILIATIONS
%
%% ------------------------------------------------------------------------ %%

% Authors are individuals who have significantly contributed to the
% research and preparation of the article. Group authors are allowed, if
% each author in the group is separately identified in an appendix.)

% List authors by first name or initial followed by last name and
% separated by commas. Use \affil{} to number affiliations, and
% \thanks{} for author notes.  
% Additional author notes should be indicated with \thanks{} (for
% example, for current addresses). 

% Example: \authors{A. B. Author\affil{1}\thanks{Current address, Antartica}, B. C. Author\affil{2,3}, and D. E.
% Author\affil{3,4}\thanks{Also funded by Monsanto.}}



\authors{Josh Nicholson\affil{1}}

\affiliation{1}{Authorea}



% \affiliation{1}{First Affiliation}
% \affiliation{2}{Second Affiliation}
% \affiliation{3}{Third Affiliation}
% \affiliation{4}{Fourth Affiliation}

%\affiliation{=number=}{=Affiliation Address=}
%(repeat as many times as is necessary)

%% Corresponding Author:
% Corresponding author mailing address and e-mail address:

% (include name and email addresses of the corresponding author.  More
% than one corresponding author is allowed in this LaTeX file and for
% publication; but only one corresponding author is allowed in our
% editorial system.)  

% Example: \correspondingauthor{First and Last Name}{email@address.edu}

%\correspondingauthor{=name=}{=email address=}

%% Keypoints, final entry on title page.

% Example: 
% \begin{keypoints}
% \item	List up to three key points (at least one is required)
% \item	Key Points summarize the main points and conclusions of the article
% \item	Each must be 100 characters or less with no special characters or punctuation 
% \end{keypoints}

%  List up to three key points (at least one is required)
%  Key Points summarize the main points and conclusions of the article
%  Each must be 100 characters or less with no special characters or punctuation 

%\begin{keypoints}
%\item = enter point 1 here = 
%\item = enter point 2 here = 
%\item = enter point 3 here = 
%\end{keypoints}

%% ------------------------------------------------------------------------ %%
%
%  ABSTRACT
%
% A good abstract will begin with a short description of the problem
% being addressed, briefly describe the new data or analyses, then
% briefly states the main conclusion(s) and how they are supported and
% uncertainties. 
%% ------------------------------------------------------------------------ %%

%% \begin{abstract} starts the second page 






\emph{(A title should be specific, informative, and brief. Use
abbreviations only if they are defined in the abstract. Titles that
start with general terms then specific results are optimized in
searches---delete these notes when done)}

\par\null

\textbf{Enter authors here: A. B.
Author}\textsuperscript{\textbf{1}}\textbf{, B. C.
Author}\textsuperscript{\textbf{2}}\textbf{, and D. E.
Author}\textsuperscript{\textbf{3}}

\par\null

\emph{(List authors by first name or initial followed by last name and
separated by commas. Use superscript numbers to link affiliations, and
symbols *+++ for author notes. For example, X.
Jones}\textsuperscript{\emph{1}}\emph{*, P.
Smith}\textsuperscript{\emph{1,2}} \emph{Authors are individuals who
have significantly contributed to the research and preparation of the
article. Group authors are allowed, if each author in the group is
separately identified in an appendix.)}

\par\null

\textsuperscript{1}Affiliation for author 1.

\textsuperscript{2}Affiliation for author 2.

\textsuperscript{3}Affiliation for author 3.

\par\null

\emph{(Affiliations should be preceded by superscript numbers
corresponding to the author list. Each affiliation should be run in so
that the full affiliation list is a single paragraph.)}

\par\null

Corresponding author: first and last name
(\href{mailto:email@address.edu)}{\nolinkurl{email@address.edu)}}

+Additional author notes should be indicated with symbols (for example,
for current addresses).

\par\null

\emph{(include name and email addresses of the corresponding author.
More than one corresponding author is allowed in this Word file and for
publication; but only one corresponding author is allowed in our
editorial system.)}

\par\null

\subsubsection*{Key Points:}\label{auto-label-subsubsection-378996}

\begin{itemize}
\tightlist
\item
  List up to three key points (at least one is required)
\item
  Key Points summarize the main points and conclusions of the article
\item
  Each must be 140 characters or less with no special characters or
  acronyms.
\end{itemize}

\emph{(The above elements should be on a title page)}

~

\subsection*{Abstract}\label{abstract}

The abstract should be a single-paragraph of less than 250 words, or for
\emph{Geophysical Research Letters}, less than 150 words. A good
abstract sets the general question or topic that you are studying for
the general reader, provides background on the specific question or
problem, briefly describes key data or analyses, and describes the key
results and uncertainties. Please avoid acronyms or if used, define
them.

\par\null

\subsection*{1 Introduction}\label{introduction}

The main text should start with an introduction. Except for short
manuscripts (such as comments and replies), the text should be divided
into sections, each with its own heading. Sections are numbered (1, 2,
3, etc.). A maximum of four levels of heads may be used, with
subsections numbered 1.1., 1.2.; 1.1.1., 1.2.1; 1.1.1.1., and so on.
Headings should be sentence fragments. Examples of headings are:

\par\null

\subsection*{2 Materials and Methods}\label{materials-and-methods}

\begin{quote}
2.1 A descriptive heading about methods
\end{quote}

\subsection*{\texorpdfstring{\textbf{3 Data, or a descriptive heading
about data4 Results, or a descriptive heading about the results5
Conclusions}}{3 Data, or a descriptive heading about data4 Results, or a descriptive heading about the results5 Conclusions}}\label{data-or-a-descriptive-heading-about-data4-results-or-a-descriptive-heading-about-the-results5-conclusions}

\emph{(All figures and tables should be cited in order. For initial
submission, please embed figures, tables, and their captions within the
main text near where they are cited. At revision, figures should be
uploaded separately, as we need separate files for production. Tables
and all captions should be moved to the end of the file.)}

\emph{References should use a name-date format, not numbers. Enclose
citations in brackets with authors in italics as in: {[}Smith et al.,}
\emph{2009{]} or} \emph{Smith et al.} \emph{{[}2009{]}.}

\subsection*{\texorpdfstring{\textbf{Acknowledgments, Samples, and
Data}}{Acknowledgments, Samples, and Data}}\label{acknowledgments-samples-and-data}

The text ends with an acknowledgment section and statement that
includes:

\begin{itemize}
\tightlist
\item
  Any real or perceived financial conflicts of interests for any author
\item
  Other affiliations for any author that may be perceived as having a
  conflict of interest with respect to the results of this paper.
\item
  A statement that indicates to the reader where the data supporting the
  conclusions can be obtained (for example, in the references, tables,
  supporting information, and other databases).
\end{itemize}

\begin{quote}
Funding information related to the work for all authors should be
entered in the form in GEMS as part of your submission. This form in
GEMS uses the official Fundref list, which provides a link after
publication that is available to funders. Any other funding information
not listed in the GEMS form should be included in the acknowledgments
and/or cover letter.
\end{quote}

It is also the appropriate place to thank colleagues and other
contributors. AGU does not normally allow dedications.

\par\null

Large data sets should ideally be deposited in a domain repository
specializing in that data type or a general repository if a specific
domain repository is not available. A directory of some Earth and space
science repositories is here: \url{https://copdessdirectory.osf.io/}.
Other data should be included as file in supporting information. AGU
requires that all data necessary to reproduce the reported finding be
available at the time of publication. Further information is available
here:
\url{http://publications.agu.org/author-resource-center/publication-policies/data-policy/}

AGU recommends use of \href{http://www.igsn.org/}{IGSN's}
(\href{http://www.geosamples.org/igsnabout}{\textbf{International Geo
Sample Numbers}}) for citing samples reported in research papers. The
IGSN provides a unique identifier that allows samples to be linked
across publications and searched through a central metadata repository.
We strongly encourage authors to register samples with an
\href{http://www.igsn.org/register-your-samples}{IGSN Allocating Agent}
and obtain IGSN's and use them throughout their manuscript, tables, and
archived data sets. We recognize IGSN's during our production process
and will provide links in the manuscript and tables to the registered
sample descriptions. IGSN's can be reserved before field seasons, or
assigned afterwards. For more information, see
\url{http://www.igsn.org}.

\par\null

\textbf{References}

All sources cited in text, tables, figures, and Supporting Information
must appear in the main reference list, and all entries in the reference
list must be cited in main text. References that are cited in supporting
information should also be included in the reference list of the paper
and worked into the text, so that they will be indexed and included in
citation records and given credit. References are not included in word
counts for excess length fees. Data sets that are not newly reported as
part of this research should also be cited in the references as a
reference.~New data sets or software that are deposited elsewhere with a
permanent identifier should be cited. AGU follows
the~\href{https://www.force11.org/group/joint-declaration-data-citation-principles-final}{Joint
Declaration of Data Citations Principles.}

\par\null

All references must be available to readers at the time of publication;
there should be no ``unpublished'' or ``in press'' references.

\par\null

An examples of reference:

Deng, A., and D. R. Stauffer (2006), On improving 4-km mesoscale model
simulations, J. Appl. Meteorol. Climatol., 45(3), 361--381,
doi:10.1175/JAM2341.1.

\par\null

\subsection*{Figure 1.}\label{figure-1.}

The figure caption should begin with an overall descriptive statement of
the figure followed by additional text. They should be immediately after
each figure. Figure parts are indicated with lower-case letters
(\textbf{a, b, c\ldots{}}). For initial submission, please place both
the figures and captions in the text near where they are cited rather
than at the end of the file (not both). At revision, captions should be
placed at the end of the file, and figures should be uploaded
separately. Each figure should be one complete file (please do not
upload parts separately).

\par\null

\subsection*{Table 1.}\label{table-1.}

Start this caption with a short description of your table. Format tables
using the Word Table commands and structures. Do not create tables using
spaces or tabs characters. Large tables especially presenting rich data
should be presented as separate excel or .cvs files, not as part of the
main text (you can add them to your Data folder directly h)

~

\selectlanguage{english}
\FloatBarrier
\end{CJK}\end{document}

