Digital Image Analysis of Gas Bypassing and Mixing in Gas-Fluidized Bed:
Effect of Particle Shape
- Shreya Chouhan,
- Ajita Neogi,
- Hare Mohanta K,
- Arvind Kumar Sharma,
- Navneet Goyal,
- Priya Sande C
Shreya Chouhan
Birla Institute of Technology & Science Pilani
Author ProfileAjita Neogi
Birla Institute of Technology & Science Pilani
Author ProfileHare Mohanta K
Birla Institute of Technology & Science Pilani
Author ProfileArvind Kumar Sharma
Birla Institute of Technology & Science Pilani
Author ProfileNavneet Goyal
Birla Institute of Technology & Science Pilani
Author ProfilePriya Sande C
Birla Institute of Technology & Science Pilani
Corresponding Author:priya@pilani.bits-pilani.ac.in
Author ProfileAbstract
not-yet-known
not-yet-known
not-yet-known
unknown
The study investigates effect of shape on gas bypassing and mixing of
gas-fluidized Geldart A particles. A shallow Fluidized Bed (FB),
configured at bench-scale, was used with Digital Image Analysis (DIA)
for the investigation. The extent of scatter of tracer particles
throughout the bed was assessed from DIA images of defluidized powder. A
novel method, employed Jupyter notebook software, which directly
determined Mixing Index from the images. Remarkably, Platelet-shaped
China clay powder displayed the best mixing characteristics (Mixing
Index: 0.79) with no significant bypassing. Angular shaped Quartz
displayed moderate mixing (Mixing Index: 0.67), but high bypassing
(Bypassing Index: 0.75). Contrary to conventional assumptions, spherical
diatomite exhibited poor mixing (Mixing Index: 0.61) with the highest
bypassing (Bypassing Index: 0.82). Platelet particles performed well
even with fines removal or larger particles addition. Most likely,
particle shape significantly influenced the number of available particle
contact points, tracer migration, and tracer on particle binding.Submitted to AIChE Journal 18 May 2024Reviewer(s) Assigned
21 Jun 2024Review(s) Completed, Editorial Evaluation Pending
06 Aug 20241st Revision Received
21 Aug 2024Submission Checks Completed
21 Aug 2024Assigned to Editor
21 Aug 2024Review(s) Completed, Editorial Evaluation Pending
04 Sep 2024Reviewer(s) Assigned
08 Oct 2024Editorial Decision: Accept