We exploit nonlinear elastodynamic properties of fractured rock to probe the micro-scale mechanics of fractures and understand the relation between fluid transport and fracture aperture and area, stiffness proxy, under dynamic stressing. Experiments are conducted on rough, tensile-fractured Westerly granite specimen subject to triaxial stresses. Fracture permeability is measured from steady-state fluid flow with deionized water. Pore pressure oscillations are applied at amplitudes ranging from 0.2 to 1~MPa at 1~Hz frequency. During dynamic stressing we transmit acoustic signals through the fracture using an array of piezoelectric transducers (PZTs) to monitor the evolution of fracture interface properties. We examine the influence of fracture aperture and contact area by conducting measurements at effective normal stresses of 10, 12.5, 15, 17.5, and 20~MPa. Additionally, the evolution of contact area with stress is characterized using pressure sensitive film. These experiments are conducted separately with the same fracture and they map contact area at stresses from 9 to 21~MPa. The resulting ‘true’ area of contact measurements made for the entire fracture surface and within the calculated PZT sensor footprints, numerical modeling of Fresnel zone. We compare the elastodynamic response of the the fracture using the stress-induced changes ultrasonic wave velocities for a range of transmitter-receiver pairs to image spatial variations in contact properties, which is informed by fracture contact area measurements. These measurements of the nonlinear elasticity are related to the fluid-flow, permeability, in response to dynamic stressing and similar comparisons are made for the slow-dynamics, recovery, of the fracture interface following the stress perturbations.