loading page

ARCHIMEDES---Direct Laser Penetration of Ice for Ocean Worlds, Martian Polar Caps, and Terrestrial Ices
  • +3
  • Victoria Siegel,
  • William Stone,
  • Bartholomew Hogan,
  • Chris Flesher,
  • Alberto Lopez,
  • Kristof Richmond
Victoria Siegel
Stone Aerospace

Corresponding Author:vickie.siegel@stoneaerospace.com

Author Profile
William Stone
Stone Aerospace
Author Profile
Bartholomew Hogan
Stone Aerospace
Author Profile
Chris Flesher
Stone Aerospace
Author Profile
Alberto Lopez
Stone Aerospace
Author Profile
Kristof Richmond
Stone Aerospace
Author Profile

Abstract

Over the past three years Stone Aerospace has developed a novel ice penetrating technology known as a Direct Laser Penetration (DLP). DLP uses laser light carried by an optical fiber to a vertically descending ice penetrator and emitted from the nose to melt the ice in front of it at extremely high power levels and melt rates. A penetrator can be made with an onboard fiber spool connected to a surface-based laser, allowing the hole to re-freeze behind, drastically increasing efficiency and providing isolation from the surface. A parallel spool can pay out a communications fiber to carry information from imagers, fiber-based sensors (e.g. temperature, pressure, seismic), and other optical sensors (e.g. fluorescence or Raman). Laser power levels of up to 100 kW (continuous) at 1070 nm wavelength are now available and can be coupled to these probes. Successful laboratory test results at Antarctic ice temperatures show that this approach could lead to the fastest ice penetration rate available to terrestrial targets, with access to any Antarctic sub-glacial lake in under 16 hours. In this way, DLP offers an alternative to traditional, logistically intense ice drilling: a small footprint system that is fast and can deploy sensor strings through the deepest ice in a short period of time. DLP also shows promise in addressing the ‘starting problem’ for extraterrestrial targets such as Europa or Mars where low pressures prevent the formation of water at the surface and thus heat transfer for traditional melt probe architectures. In order to test the effectiveness of this concept, a Europa environment ‘cryovac’ test facility has been built at Stone Aerospace in Austin, Texas. We will discuss quantitative results from initial lab and chamber tests of the DLP concept, including in an ice column at 100 K temperature subjected to vacuum.