loading page

Cyclic Extrusion Synthesis of Mesoporous Carbon-Supported Metal Catalysts for Selective Hydrogenation
  • +2
  • Pengfei Zhang,
  • Jialu Xu,
  • Shengtai Hou,
  • Qiang Niu,
  • Zheng-Hong Luo
Pengfei Zhang
Shanghai Jiao Tong University

Corresponding Author:chemistryzpf@sjtu.edu.cn

Author Profile
Jialu Xu
Shanghai Jiao Tong University
Author Profile
Shengtai Hou
Shanghai Jiao Tong University
Author Profile
Qiang Niu
Group Co., Ltd.
Author Profile
Zheng-Hong Luo
Shanghai Jiao Tong University
Author Profile

Abstract

The mesoporous carbon-supported metal catalysts are important materials in heterogeneous catalysis. From the standpoint of process intensification, the current synthesis methods still suffer from several issues, such as the excessive use of toxic solvents, the time-consuming self-assembly process, and the difficulty of continuous production. Herein, we report a solvent-free and continuous route to synthesize mesoporous carbon-supported metal catalysts. Interestingly, the use of cyclic extrusion could promote the mixing, coordination, and assembly of catalyst precursors (tannin-metal salts-additives) by shearing and squeeze force. The as-made mesoporous carbon-supported nickel showed high surface areas (up to 512m2g-1), narrow pore size distribution (~10 nm), and good performance in the selective hydrogenation of nitrobenzene to aniline (Conv.>99%; Sel.>99%). In addition, the fluid property of catalyst precursors and the geometry of the twin-screw extrusion channel were studied, and the essence of this cyclic extrusion process is also discussed.