Ultra-reliable and low latency communications (URLLC) will be the backbone of the upcoming sixth-generation (6G) systems and will facilitate mission-critical scenarios. A design accounting for stringent reliability and latency requirements for URLLC systems poses a challenge for both industry and academia. Recently, unmanned aerial vehicles (UAV) have emerged as a potential candidate to support communications in futuristic wireless systems due to providing favourable channel gains thanks to Lineof-Sight (LoS) communications. However, usage of UAV in cellular infrastructure increases interference in aerial and terrestrial user equipment (UE) limiting the performance gain of UAV-assisted cellular systems. To resolve these issues, we propose low-complexity algorithms for intercell interference coordination (ICIC) using cognitive radio when single and multi-UAVs are deployed in a cellular environment to facilitate URLLC services. Moreover, we model BS-to-UAV (B2U) interference in downlink communication, whereas in uplink we model UAV-to-BS (U2B), UAV-to-UAV (U2U), and UE-to-UAV (UE2U) interference under perfect/imperfect channel state information (CSI). Results demonstrate that the proposed perfect ICIC accounts for fairness among UAV especially in downlink communications compared to conventional ICIC algorithms. Furthermore, in general, the proposed UAV-sensing assisted ICIC and perfect ICIC algorithms yield better performance when compared to conventional ICIC for both uplink and downlink for the single and multi-UAV frameworks. INDEX TERMS URLLC, multi-UAV, cognitive radio, intercell interference coordination (ICIC).

In this work, we propose a model that describes the temporal evolution of the threshold voltage and trapped charge density in Thin-Film Transistors (TFTs) under dynamic conditions, paving the way for the characterization of memory transistors. The model is expressed as a first order differential equation for the trapped charge density, which is controlled by a time constant and an independent term proportional to the drain current. The time dependent threshold voltage is introduced in a previously developed compact model for TFTs with special consideration to the contact effects. The combination of both models and the use of an evolutionary parameter extraction procedure allow for reproducing the experimental dynamic behavior of TFTs. The results of the model and the evolutionary procedure have been validated with published experimental data of pentacene-based transistors. The procedure is able to simultaneously reproduce three kinds of experiments with different initialization routines and constraints in each of them: output and transfer characteristics with hysteresis and current transients characteristics.

Text generation is an important method to generate high quality and available product description from product title. For the product description generation for online E-commerce application, the main problem is how to improve the quality of generated text for App sales. In other words, how we judge the quality of text. If all texts are already positive and available, then we find it impossible to manually judge which text is the better text for a product. So if we cannot judge which is a better text manually, we cannot improve the quality of generated text. In E-commerce, product description is to attract shoppers and improve sales. So we design a method to improve the quality of generated text based on user buying behaviour. Online result shows that our approach improve the sales of products by improving the text quality.

In this paper, we explore an indoor downlink cooperative hybrid visible light communication (VLC)/radio frequency (RF) scenario using a relay node to reduce system outage probability. In particular, information can be transmitted to the end user either directly through the VLC link or via the relay node. To re-transmit the decoded information to the end user through the RF link the relay utilizes harvested energy from the source light emitting diode (LED) at the ceiling. We derive the analytical expression for the outage probability of the relayaided hybrid VLC/RF system, considering the randomness of location and receiver orientation for both the relay and the end user. Furthermore, we investigate the effects of the direct current (DC) bias, data rate threshold, and different distributions for the location and orientation of the end user and relay on the outage probability of the system.

The value of colorless, directionless, and contentionless (CDC-)ROADM (reconfigurable optical add/drop multiplexer) nodes is strongly contested in the optical networking community. In this work, we compare known ROADM node designs incorporating different switching elements and account for their total nodal switching state support (in consideration of both channel routing and add/drop). This allows us to quantify the impact of directional/contentional accessibility constraints to add/drop transceivers. By considering the network node entity as a permutation network among its ingress/egress ports for all wavelength channels, which covers both through routing and add/drop assignments, we tabulate the node’s switching capacity, or total allowable connection states, per different ROADM architecture, hardware constraints, and finite number of add/drop transceivers. We further introduce the impact of idle wavelength channels on fiber links, as well as bidirectional routing assignments. Our switching capacity enumerations demonstrate that CDC-ROADM outperforms other designs, but parallel contentional aggregation hardware (partially contentional) and directional transceivers (permanently assigned to port directions) offer competitive performance under certain scenarios (at lower and higher number of deployed transceivers, or a combination of both). These findings suggest that design alternatives to the “difficult to implement” CDC-ROADM exist, with nearly equivalent switching capacity, and additional system considerations must be taken into account for ROADM design selection such as hardware availability, cost, impact of traffic churn, and disaster recovery with over-provisioned add/drop transceivers.

Advances in Internet of Things (IoT) technologies have resulted in a significant surge in the utilization of sensor devices across diverse domains for environmental sensing and monitoring. The applications of IoT sensor devices in environmental monitoring span a wide range, including the surveillance of biodiverse areas such as peatlands, forests, and oceans, as well as air quality monitoring, commercial agriculture, and the safeguarding of endangered species. This paper provides a long term evaluation of IoT sensors data quality in environmental monitoring networks, particularly focusing on peatland regions. IoT sensors have the capacity to provide high resolution spatiotemporal dataset in environmental monitoring networks. Sensor data quality plays significant role in increasing the adoption of IoT devices for environmental data gathering. However, due to the nature of deployment (i.e., in harsh and unfavourable weather conditions), coupled with the limitations of low-cost components, IoT sensors are prone to collection of erroneous data, also the nature of peatland ecosystems presents unique challenges in data quality assurance due to their complex and dynamic characteristics. This paper identifies specific challenges and issues related to IoT sensor data quality in different peatland ecotopes. These challenges include sensor placement and calibration, data validation and fusion, environmental interference, and the management of data gaps and uncertainties. To address these challenges, the paper presents and evaluates methods for improving data quality in peatland monitoring networks. These methods encompass advanced sensor calibration techniques, data validation algorithms, machine learning approaches, data processing and data fusion strategies.

Speech overlap, which occurs when multiple people speak simultaneously, poses a significant challenge in audio and speech processing. The presence of overlapping speech segments significantly degrades the performance of technologies such as Automatic Speech Recognition (ASR), speaker identification, and diarization systems. This degradation in performance becomes more significant in diverse acoustic environments with background noise and reverberation. To effectively address this issue, we introduce BiConNet. This novel dual-branch architecture combines the strengths of Convolutional Neural Networks (CNN) and Bidirectional Long Short-Term Memory (BiLSTM) for robust detection of overlapping speech in diverse acoustic conditions. The CNN branch is used for frame-level spectral feature extraction, while the BiLSTM branch captures temporal dependencies from both forward and backward directions. Features from both branches are concatenated, resulting in a robust feature representation. We also examined the impact of Mel Frequency Cepstral Coefficients (MFCC), Gammatone Frequency Cepstral Coefficients (GTCC), and Power Normalized Cepstral Coefficients (PNCC) as spectral-based features on BiConNet's performance. To validate its effectiveness in various acoustic environments, we developed a constructed data set derived from the GRID corpus, including conversations with different gender combinations and recording conditions, such as clean, noisy, reverberant, and combined noise and reverberation conditions. Experimental results show that BiConNet outperforms various state-of-the-art methods in detecting overlapping speech segments under these conditions. Furthermore, our analysis of computational efficiency reveals that BiConNet provides competitive training and inference times, demonstrating its practicability for real-world applications.

Stringent physical requirements need to be met for the high performing surface-electrode ion traps used in quantum computing, sensing, and timekeeping. In particular, these traps must survive a high temperature environment for vacuum chamber preparation and support high voltage rf on closely spaced electrodes. Due to the use of gold wirebonds on aluminum pads, intermetallic growth can lead to wirebond failure via breakage or high resistance, limiting the lifetime of a trap assembly to a single multi-day bake at 200 • C. Using traditional thick metal stacks to prevent intermetallic growth, however, can result in trap failure due to rf breakdown events. Through high temperature experiments we conclude that an ideal metal stack for ion traps is Ti20nm/Pt100nm/Au250nm which allows for a bakeable time of roughly 86 days without compromising the trap voltage performance. This increase in the bakable lifetime of ion traps will remove the need to discard otherwise functional ion traps when vacuum hardware is upgraded, which will greatly benefit ion trap experiments.

This paper describes a method for automatically transforming the structure and characteristics of an image processing dataflow graph for the purpose of improving performance and/or lowering memory utilization as compared to the baseline tools. Embedded image processing applications are often executed on Digital Signal Processors, or their modern equivalent Visual Processor Units. The software usually performs a series of pixel-level operations for basic color conversion, channel extraction and combining, arithmetic, and filtering. These steps can often be efficiently described as a graph. For this reason, standard libraries such as OpenVX are used, which provide a graph-based programming model where the nodes are chosen from a repertoire of common pixel-level operations and the edges represent the flow of images as they progress though the processing stages. Generally speaking, each node is processed sequentially in the order implied by the data dependencies defined by the graph structure, with all intermediate values stored in external memory. In the proposed framework, we developed performance models for both the direct memory access subsystem and the L1 data cache to allow for selection of certain intermediate values to be stored in on-chip scratchpad memory as well as selecting the most appropriate tile size. In this way, we effectively decompose the graph in a way to fuse specific sets of nodes to associate their internal edges with on-chip buffers. Additionally, the tile size is optimized for each fused set of nodes. In this paper, we describe our performance models and approach for graph decomposition and tile size selection. The proposed performance models are accurate to within 2% on average, and the overall approach of graph optimization achieves an average speedup of 1.3 and allows for reduction of average DRAM utilization from 100% to as low as 15%.

In this study, we present a novel method for creating an environment model suitable for addressing the sensor placement problem. We extract a detailed environment model from a 3D point cloud by identifying spatial boundaries and furniture in indoor spaces and representing them as a series of polygons. To validate our method, we compare its performance against ground truth data, demonstrating high accuracy in both simple and complex environments. Subsequently, we employ the obtained models in a comprehensive experiment that evaluates the effectiveness of six metaheuristic optimization algorithms in solving the sensor placement problem. We examine how the choice of optimization algorithm and the number of sensors impacts the achieved coverage through statistical analysis. With this study, we gain insights into the comparative effectiveness of various evolutionary algorithms in enhancing sensor network design within indoor spaces. In particular, the Artificial Bee Colony algorithm consistently delivered superior results.

Cryptography has become an essential tool in information security, preserving data confidentiality, integrity, and availability. However, despite rigorous analysis, cryptographic algorithms may still be susceptible to attack when used on real-world devices. Side-channel attacks (SCAs) are physical attacks that target cryptographic equipment through quantifiable phenomena such as power consumption, operational times, and EM radiation. These attacks are considered to be a significant threat to cryptography since they compromise the integrity of the algorithm by obtaining the internal cryptographic key of a device by seeing its physical implementation. The literature on SCAs has focused on real-world devices, yet with the growing popularity of sophisticated devices like smartphones, fresh approaches to SCAs are necessary. One such approach is electromagnetic side-channel analysis (EM-SCA), which gathers information by listening to electromagnetic (EM) radiation. EM-SCA has been demonstrated to recover sensitive data like encryption keys and has the potential to identify malicious software, retrieve data, and identify program activity. This study aims to evaluate how well EM-SCA compromises encryption under various application scenarios, as well as examine the role of EM-SCA in digital forensics and law enforcement. Regarding this, addressing the susceptibility of encryption algorithms to EM-SCA approaches can provide digital forensic investigators with the tools they desire to overcome the challenges posed by strong encryption, allowing them to continue playing a crucial role in law enforcement and the justice system. Furthermore, this paper seeks to define the current state of EM-SCA in terms of attacking encryption, the encryption algorithms and encrypted devices that are most vulnerable and resistant to EM-SCA, and the most promising EM-SCA on encryption approaches. This study will provide a comprehensive analysis of EM-SCA in the context of law enforcement and digital forensics and point towards potential directions for further research.

In order to low-frequency stabilize the electric field integral equation (EFIE) when discretized with divergence conforming B-spline based basis and testing functions in an isogeometric approach, we propose a corresponding quasi-Helmholtz preconditioner. To this end, we derive i) a loop-star decomposition for the B-spline basis in the form of sparse mapping matrices applicable to arbitrary polynomial orders of the basis as well as to open and closed geometries described by single-or multipatch parametric surfaces (as an example non-uniform rational Bsplines (NURBS) surfaces are considered). Based on the loopstar analysis, we show ii) that quasi-Helmholtz projectors can be defined efficiently. This renders the proposed low-frequency stabilization directly applicable to multiply-connected geometries without the need to search for global loops and results in betterconditioned system matrices compared to directly using the loopstar basis. Numerical results demonstrate the effectiveness of the proposed approach.

In order to accurately compute scattered and radiated fields in the presence of arbitrary excitations, a lowfrequency stable discretization of the right-hand side (RHS) of a quasi-Helmholtz preconditioned electric field integral equation (EFIE) on multiply-connected geometries is introduced, which avoids an ad-hoc extraction of the static contribution of the RHS when tested with solenoidal functions. To obtain an excitation agnostic approach, our approach generalizes a technique to multiply-connected geometries where the testing of the RHS with loop functions is replaced by a testing of the normal component of the magnetic field with a scalar function. To this end, we leverage orientable global loop functions that are formed by a chain of Rao-Wilton-Glisson (RWG) functions around the holes and handles of the geometry, for which we introduce cap surfaces that allow to uniquely define a suitable scalar function. We show that this approach works with open and closed, orientable and non-orientable geometries. The numerical results demonstrate the effectiveness of this approach.

The extensive applications of wires and cables in industries are a result of the rapid advancements in electronic device technology. Despite the established use of wireless technology, safety concerns have sustained the reliance on cables. Detecting soft faults is a challenging task due to the fact that they create reflections that are not easily distinguishable. Time and frequency domain reflectometry are commonly used for fault detection. Here, we propose a stable and effective method for estimating transmission line (TL) impedance using frequency domain reflectometry with neural network models. This method not only identifies the location of soft faults but also provides an impedance profile across the TLs. The performance of the proposed method is verified using simulated and experimental data. Moreover, we address the limitations of the Born approximations, which become ineffective for lossy TLs. The proposed method takes into account the loss information of the TLs, enabling accurate estimations of both the real and imaginary parts of the complex impedance values.

Manual object identification labelling is laborious, time-consuming and prone to inconsistencies hindering advancements in various computer vision tasks.These inconsistencies can lead to inaccurate models with poor performance. Considering these potential consequences, highlights the importance of addressing labelling challenges for ethical and responsible AI development. To address this our study evaluates several popular platforms for their suitability in tackling these challenges. Roboflow, Makesense.ai, SentiSight.ai, Labelbox and SuperAnnotate are the five different data labelling platforms that have been taken for assessment. The study identifies strengths and weaknesses of each platform in the context of basketball detection using YOLO v8, a deep learning model for object detection, image classification, and image segmentation. Each platform is analysed based on features, ease of use, pricing, and support for image annotation, object detection, and YOLO v8 integration. After analysing these factors, a final recommendation is made, highlighting the platform that demonstrably offers the best balance of features, efficiency, and cost-effectiveness for this specific task. The study helps in deeper exploration of the potential of YOLO v8. It is mainly aimed at assisting the Video Assistant Referees(VARs) for accurate and unbiased decision-making and also empowers the development of AI technology across the domain of sports.

Cell-free massive MIMO networks have recently emerged as an attractive solution capable of solving the performance degradation at the cell edge of cellular networks. For scalability reasons, usercentric clusters were recently proposed to serve users via a subset of APs. In the case of dynamic mobile scenarios, this form of network organization requires predictive algorithms for forecasting propagation parameters to maintain performance by proactively allocating new APs to a user. In this paper, we present a BiLSTM-based multivariate path loss forecasting algorithm. Thanks to the combination of dual prediction by the BiLSTM and diversity from multiple antennas, our model mitigates the error propagation typically faced by sequential neural networks for time-series forecasting. In the evaluated scenario, from 2 to 10 steps ahead, we reduce the propagation of the error by a factor of 18 compared to previous research on path loss forecasting by an LSTM time-series-based model. In contrast to parallel transformer solutions, the complexity cost of our algorithm is also significantly lower.

Flood monitoring with satellite images is an effective method of detecting and tracking floods. This approach involves the use of satellite imagery to detect changes in water levels and identify flooded areas. To monitor floods using satellite images, the images are analyzed to detect changes in water levels over time. To detect changes in water levels and identify flooded areas based on a set of predefined criteria, we can train algorithms. Amazon SageMaker geospatial capabilities make it easier for data scientists and machine learning (ML) engineers to build, train, and deploy ML models using geospatial data.  These capabilities also provide pre-trained models. One of the pre-trained models is land cover segmentation model. This land cover segmentation model can be run with a simple API call and can be leverage to analyze changes in the water level.

The goal of cancer treatment is to remove or kill malignant cells while preserving surrounding healthy tissue. Among treatment methods, needle-based ultrasound thermal ablation is an option that involves the insertion of an applicator into the patient's body and the use of an ultrasound transducer to vibrate tissue, producing heat. An ablation pattern for an arbitrarily shaped tumor can be approximated by moving the applicator to deposit heat in targeted locations. However, this conformal ablation process is challenging to control because of the complex interactions between tissue and ultrasound. To address this, we built an interactive planning toolkit that allows a physician to perform the procedure multiple times in simulation and record the ablation trajectory once a desired result is achieved. To validate this method, a previously developed MRconditional robot was used to replicate the planned ablation in a phantom model. Live Magnetic Resonance Thermal Imaging was used to track temperature changes, allowing us to measure the thermal dose and identify the ablated region. In 4 ablations experiments, we achieved an average of 80.9% overlap between the targeted tumor area and the actual ablated area, with minimal damage of 9.4% affected surrounding tissues, demonstrating the effectiveness of our approach.