loading page

Study on low-cycle fatigue behavior and life prediction of Cr–Ni–Mo–V gun steel at room temperature and 600 ℃
  • +6
  • Chao Zhao,
  • Xiaobin Jia,
  • Caiyan Zhao,
  • Shaobin Bai,
  • Yanli Huang,
  • Qing Zhang,
  • Jian Zhang,
  • Yongping Hu,
  • Jinfeng Huang
Chao Zhao
North University of China

Corresponding Author:20220012@nuc.edu.cn

Author Profile
Xiaobin Jia
Inner Mongolia North Heavy Industries Group Corp Ltd
Author Profile
Caiyan Zhao
Henan Zhongyuan Special Steel Equipment Manufacturing Corp Ltd
Author Profile
Shaobin Bai
North University of China
Author Profile
Yanli Huang
Inner Mongolia North Heavy Industries Group Corp Ltd
Author Profile
Qing Zhang
Inner Mongolia North Heavy Industries Group Corp Ltd
Author Profile
Jian Zhang
Henan Zhongyuan Special Steel Equipment Manufacturing Corp Ltd
Author Profile
Yongping Hu
Inner Mongolia North Heavy Industries Group Corp Ltd
Author Profile
Jinfeng Huang
University of Science and Technology Beijing State Key Laboratory for Advanced Metals and Materials
Author Profile

Abstract

In this paper, the low-cycle fatigue fracture behavior and life prediction of Cr Ni Mo V gun steel at room temperature and 600 ℃ are studied. The results indicated that at room temperature and 600 ℃, the Cr Ni Mo V gun steel exhibited obvious monotony softening and cyclic softening. This behavior could be attributed to the formation of dislocation networks, dislocation walls, dynamic recovery, and dynamic recrystallization. As the temperature increased, the failure mode gradually shifted from mixed transgranular and intergranular fractures to intergranular fractures possibly owing to the reduced grain boundary strength and easy oxidation of the grain boundary at high temperatures. In addition, the fatigue life prediction model considering the influence of temperature is established by using the energy dissipation quadratic function, offering a practical method to improve the fatigue performance evaluation of Cr Ni Mo V gun steel at various temperature.
Submitted to Fatigue & Fracture of Engineering Materials & Structures
23 Jun 2024Reviewer(s) Assigned
19 Jul 2024Review(s) Completed, Editorial Evaluation Pending
23 Jul 2024Editorial Decision: Revise Major
11 Aug 20241st Revision Received
11 Aug 2024Submission Checks Completed
11 Aug 2024Assigned to Editor
12 Aug 2024Reviewer(s) Assigned
29 Aug 2024Review(s) Completed, Editorial Evaluation Pending
03 Sep 2024Editorial Decision: Revise Minor
05 Sep 20242nd Revision Received
05 Sep 2024Submission Checks Completed
05 Sep 2024Assigned to Editor
05 Sep 2024Reviewer(s) Assigned
14 Sep 2024Review(s) Completed, Editorial Evaluation Pending
20 Sep 2024Editorial Decision: Accept