loading page

Robust Higher Order Sliding Mode Control of Grid-Forming Converters with LCL Filter in Weak Grid Scenarios for Fast Frequency Support
  • +1
  • Tuhin Das,
  • Udaya Annakkage,
  • Dharshana Muthumuni,
  • In Park
Tuhin Das
University of Manitoba

Corresponding Author:dast@myumanitoba.ca

Author Profile
Udaya Annakkage
University of Manitoba
Author Profile
Dharshana Muthumuni
MHI
Author Profile
In Park
AMETEK Inc
Author Profile

Abstract

This paper presents a nonlinear higher-order sliding mode control (HO-SMC) designed for a droop control-based grid-forming converter (GFM). In weak grid scenarios, where the rate of change of frequency (ROCOF) is notably high, achieving a rapid frequency response becomes imperative. The stable operation of a grid-forming converter using droop control, coupled with classical vector control employing cascaded voltage and current loops (multiloop), faces limitations when higher droop coefficients are applied. This constraint on the application of classical vector control (CVC) in weak grid conditions necessitates alternative solutions. Operating as a grid-forming converter, the grid-connected converter with an LCL filter represents a second-order system. HO-SMC mitigates the switching challenges associated with conventional SMC by integrating robust feedback linearized control. A graphical method is proposed for designing the switching gain using Lyapunov’s direct method to counteract the impact of a matched disturbance. The study demonstrates that the implementation of HO-SMC in the grid-forming converter enhances fast frequency response by increasing the gain margin of the power frequency (P-f) loop. Finally, it is illustrated that the proposed control method also improves the transient response of the converter.
28 Jan 2024Submitted to IET Generation, Transmission & Distribution
20 Apr 2024Submission Checks Completed
20 Apr 2024Assigned to Editor
20 Apr 2024Review(s) Completed, Editorial Evaluation Pending
26 Jun 2024Reviewer(s) Assigned
15 Jul 20241st Revision Received
18 Jul 2024Submission Checks Completed
18 Jul 2024Assigned to Editor
18 Jul 2024Review(s) Completed, Editorial Evaluation Pending
18 Jul 2024Reviewer(s) Assigned
22 Aug 2024Editorial Decision: Accept