loading page

LIDAR-assisted feedforward individual pitch control of a 15 MW floating offshore wind turbine
  • +3
  • Andrew J. Russell,
  • Maurizio Collu,
  • Alasdair McDonald,
  • Philipp Thies,
  • Aidan Keane,
  • Alexander R. Quayle
Andrew J. Russell
The University of Edinburgh School of Engineering

Corresponding Author:a.j.russell-1@sms.ed.ac.uk

Author Profile
Maurizio Collu
University of Strathclyde Naval Architecture Ocean and Marine Engineering
Author Profile
Alasdair McDonald
The University of Edinburgh School of Engineering
Author Profile
Philipp Thies
University of Exeter
Author Profile
Aidan Keane
Wood Renewables
Author Profile
Alexander R. Quayle
Flotation Energy Ltd
Author Profile

Abstract

Nacelle-mounted, forward-facing LIDAR technology is able to deliver benefits to rotor speed regulation and loading reductions of floating offshore wind turbines when assisting with blade pitch control in above-rated wind speed conditions. Large-scale wind turbines may be subject to significant variations in structural loads due to differences in the wind profile across the rotor-swept area. These loading fluctuations can be mitigated through the use of individual blade pitch control (IPC). This paper presents a novel LIDAR-assisted feedforward IPC approach that uses each blade’s rotor azimuth position to allocate an appropriate individual pitch command from a multi-beam LIDAR. In this computational study, the source code of OpenFAST wind turbine modelling software was modified to enable LIDAR simulation and LIDAR-assisted control. The LIDAR simulation modifications made are present in the latest OpenFAST release, v3.5. Simulations were performed on a single 15 MW floating offshore wind turbine across the above-rated wind spectrum and using multiple randomly generated wind profiles. Under a turbulent wind field with an average wind speed of 17 ms -1, the LIDAR-assisted feedforward IPC delivered root mean squared error and standard deviation reductions to key turbine and substructure parameters by up to 35%. Feedforward IPC delivered enhancements of up to 10% over feedforward collective pitch control, which instead provided the same feedforward command to all blades, compared to the baseline feedback controller. The reductions to the standard deviation and range of the rotor speed may enable structural optimisation of the tower, while the reductions in the variations in the loadings present an opportunity for reduced fatigue damage on turbine components and, consequently, a reduction in maintenance expenditure.
18 Oct 20231st Revision Received
18 Oct 2023Submission Checks Completed
18 Oct 2023Assigned to Editor
18 Oct 2023Review(s) Completed, Editorial Evaluation Pending
20 Oct 2023Reviewer(s) Assigned
21 Nov 2023Editorial Decision: Revise Minor
22 Nov 20232nd Revision Received
22 Nov 2023Submission Checks Completed
22 Nov 2023Assigned to Editor
22 Nov 2023Review(s) Completed, Editorial Evaluation Pending
22 Nov 2023Reviewer(s) Assigned