loading page

New Technology for Ship Bilge and Oily Water Separation
  • +2
  • Oleksiy Malakhov,
  • Oleksandr Palagin,
  • Andrii Naydyonov,
  • Konstantin Lykhoglyad,
  • Andrii Bondarenko
Oleksiy Malakhov
National University Odessa Maritime Academy

Corresponding Author:a_malahov@yahoo.com

Author Profile
Oleksandr Palagin
National University Odessa Maritime Academy
Author Profile
Andrii Naydyonov
National University Odessa Maritime Academy
Author Profile
Konstantin Lykhoglyad
National University Odessa Maritime Academy
Author Profile
Andrii Bondarenko
National University Odessa Maritime Academy
Author Profile

Abstract

Bilge and oily water (BOW) during vessel’s operation are the most large-tonnage type of waste and for their treatment all ships, in accordance with regulatory requirements [14], have to be equipped with special equipment – oily water separators. At sea vessel’s operating conditions three main directions of BOW cleaning are now used: physical, chemical and biological. The analysis of BOW separation methods based on these three directions has shown that it is very difficult to obtain secondary petrochemical products. In the article authors offer a new method for BOW separation which is based on the use of a hydrodynamic process of supercavitation with artificial ventilation of the cavitational cavern. With local origin in the flow of a supercavitating cavern, there will always be saturated water vapor inside of it. The process of permanent water vapor selection from the cavern will ultimately contribute to the production of highly concentrated mixture of secondary petroleum products from initial mixture of BOW. During the study of BOW separation process it was found that decreasing of the working pressure inside the working chamber of the cavitation separator have to be always compensated by an increase in the temperature of the processed multiphase flow.
25 Apr 2023Submitted to Engineering Reports
01 May 2023Submission Checks Completed
01 May 2023Assigned to Editor
03 May 2023Review(s) Completed, Editorial Evaluation Pending
08 May 2023Reviewer(s) Assigned
29 Jun 2023Editorial Decision: Revise Minor
17 Jul 20231st Revision Received
17 Jul 2023Submission Checks Completed
17 Jul 2023Assigned to Editor
17 Jul 2023Review(s) Completed, Editorial Evaluation Pending
26 Jul 2023Reviewer(s) Assigned
31 Jul 2023Editorial Decision: Accept